Mcl-800d Low Speed Centrifuge

• Application: School, Hospital, Lab
• Customized: Customized
• Certification: CE
• Structure: Portable
• Transport Package: Standard for Export
• Trademark: MeCan
• Model NO.: MCL-800D
• Origin: Guangzhou, China

Product Description

MCL-800D Low speed centrifuge


Product Description:

 

Centrifugal separation technology is to produce centrifugal force by high-speed rotating motor to impel the mixture grain with different density and size in different speed to sediment in centrifugal field. Then the mixture grain are split at last. This kind of technology is to be used widely in the laboratory of scientific institute, higher school, petrol-chemical industry. Environment department, which is to be carried out to analyze the centrifugal qualitative and quantitative of plasma, serum, urina, vaccine, organism, inorganic compound etc. The centrifugal has perfect appearance and performance of low noise, small size, light weight. Simple operation and conveniend use. It is a key equipment in laboratory. 

 

Product Specification:   

a.conditions

temp:5ºC-40ºC

 Humidity:≤80%RH

b.Performance index:see Table 1

c.Power:AC220V±22V   50Hz±1HzA

  Table 1:Centrifugal performance index

Type	MCL-800D
Power output(W)	25
Rotating speed(rpm)	1000-4000
Maximum volum(ml)	6×15ml
Voice	≤75dB(A)
Tempreture increase	≤12ºC

 

Usage methods:

a.Put the matter quantitative (about 5ml)into the centrifugal tube. (the weight of each centrifugal is nearly the same).

b.Insert the centrifugal tube to the hole of the centrifugal head evenly. Then close the cover.

c.Switch on the power. The power indicator lights. The motor begins rotating and the samples start to split. After the time is up, the centrifugal splitting finished.

Switch off the power. Take down the power plug, open the upper cover of the instrument and take out the centrifugal tubes which means a course of centrifugal operation is finished.

Notice:

a.For safe, the power line should be brought out through a three-core socket with good ground.

b.The upper cover of the instrument should not be opened as the centrifugal head is rotating in a high speed and the rotating disk should not be stopped by hand when the centrifugal head hasn't stopped completely. After working, turn off the power first and then take out the centrifugal tubes when the centrifugal head stopped completely.

c.The instrument is not applicable for the matter with much density, such as metal, mineral.

d.The samples in each centrifugal tube should be in equal weight(relative weight deviation<3g)and be well distributed in the centrifugal head for increasing the instrument's stability and decreasing noise.