| Customization: | Available |
|---|---|
| Classification: | Imaging Diagnostic Equipment |
| Type: | X-ray Flat Panel Detector |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
1. Flat panel x-ray detector MCO-FP43 production is a Portable type and low noise x ray flat panel detector based on amorphous silicon technology.
2. A- Si technology based detector owns many advantages that are unavailable with other technology, Flat panel x-ray detector MCO-FP43 production takes a high image quality and a large dynamic range, also Flat panel x-ray detector MCO-FP43 possesses multi- gain stage, this function makes it possible that the detector can both be suitable for high sensitivity and large dynamic range requirements.
3. Based on above characteristics, Flat panel x-ray detector MCO-FP43 detector can be widely used in medical, industrial, veterinary, and research application area.
Features:
| Model | MCO-FP43 |
| Pixel Pitch | 140 um |
| ADC | 16-bit |
| Gain Stage | Multi- Gain |
| Scintillator | GOS/CSI |
| Water Proof | IPX0 |
| Interface | Quick self- locking connector |
| Calibration | Software, Firmware |
Specification
| Sensor | a-Si |
| Scintillator | Gos/ Csl |
| Active Area | 434 x 434 mm |
| Pixel Matrix | 3072 x 3072 |
| Pixel Pitch | 140 um |
| AD Conversion | 16 bits |
| Communication Interface | Gigabit Ethernet |
| Exposure Control | Trigger In(Edge or Level) / Trigger Out(Edge or Level) |
| (Edge or Level) | ≤1 seconds |
| Operating System | Windows7 / window8 / window10 OS 32 bit or 64 bit |
| Resolution | 3.5 lp/mm |
| Energy Range | 40~160 KV |
| Lag | <1% 1st frame |
| Dynamic Range | ≥86 dB |
| Sensitivity | 540 Isb/uGy |
| SNR | 50 dB @(20000lsb) |
| MTF | 70% @(1 lp/mm); 38% @(2 lp/mm); 21% @(3 lp/mm) |
| DQE | 58% @(0 lp/mm); 41% @(1 lp/mm); 25% @(2 lp/mm) |
| Dimension(H xW x D) | 460x 460x 15 mm |
| Weight | 3.5Kg |
| Sensor Protection Material | Carbon Fiber |
| Housing Material | High Strength Aluminum Alloy |
| Temperature Range | 10~ 35°C (operating); -10~ 50°C (storage) |
| Humidity | 30~ 70% RH (non-condensing) |
| Vibration | IEC/EN 60721-3 class 2M3 (10~ 150 Hz, 0.5 g) |
| Shock | IEC/EN 60721-3 class 2M3 (11 ms,2 g) |
| Dust and Water Resistant | IPXO |
| Supply | 100~ 240 VAC |
| Frequency | 50/60 Hz |
| Consumption | Consumption |
){kind=link}