Basic Info.
Customized
Non-Customized
Specification
33 x 31.8 x 13.5 cm
Product Description
Medical Equipment Hospital First Aid Portable External Biphasic AED Defibrillator with Monitor
Features:Defibrillator Biphasic energy output: 2-360J
ECG monitoring
SpO2
AEDBatteryRechargeable | 12V ; NI-MH |
Capacity | 60 defibrillator discharges @ a new, fully charged battery, or 3 hours minimum continuous ECG monitoring |
DefibrillatorWaveform Details:The tables below provide details of the waveforms delivered by the DM7000 when connected to resistive loads of 25, 50, and 100 Ohms and set to its maximum output. The waveforms are characterized by tyDM7000al values for peak current (Ip), and for monophasic: duration of the output phase (t) or for biphasic: duration of the first output phase (tphase1), and duration of the second output phase (tphase2). The values shown are within 10%.Waveform: M&B Model DM7000 Truncated Exponential MonophasicOutput Energy Accuracy:+/- 10% or 1J (whichever is greater) at 50 ohms+/- 15% or 1J (whichever is greater) at 25 to 100 ohmsEnergy Select:External: 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 J.Charge Time: < 7 seconds @ 360 J (with a SmartPak Plus battery after 15discharges).<9 seconds @ 360 J (with a SuperPac battery after 15discharges).< 15 seconds @ 360 J (no battery, 90% AC mains voltage)Charge Indicator: Audible and graphic.Output: Adult paddles, pediatric adapter and multipurpose hands-free adapter available.Synchronizer: Delivers energy within 60 msec.Disarm: Front panel switch.Monitor/Display
Input: 3-lead, 5-lead, patient cable, paddles, or multi-purpose hands-free adapter. Size: 6.5 inches (16.5 cm) diagonal, non-fade.Type: color (TFT)Display Resolution: 800 x 600 pixels.Sweep Speed: 12.5mm/s,25mm/s,50mm/sLead Selections: Paddles (Pads), I, II, III, AVR, AVL, AVF, V.Frequency Response: (User-selectable).2 to 20 Hz Limited mode1 to 40 Hz Monitor mode (before Rev. T8/U8)0.05 to 150 Hz Diagnostic mode0.5 to 30 Hz AED modeCommon Mode Rejection:Meets AAMI EC13-1992, section 3.1.2.1c for 1.2 mV T-wave (1.0 mV with diagnostic response) and 1mV QRS.Diagnostic Signals Applied to Patient Connections: Leads off / active noise suppression sensing circuit is < 0.1mA DC. The impedance / respiration detector signal frequency is 45 ± 4kHz at 78mA RMS (117mV RMS into an impedance of 1.5kW) pseudo-sinewave.Heart Rate Meter: 20 to 300 BPM.Heart Rate Alarms: User-selectable.Size: 0.125, 0.25, 0.5, 1, 2, 4 cm/mv and auto-ranging.Aspect Ratio: 0.5, 0.1, 0.4, 0.8, 1.6, respectively.ECG Output: 1 V/mV.Heart Rate Meter Response Time: Responds to a 40 BPM step increase in heart rate in 2 to 4.5seconds per AAMI EC-13-1992, section 3.1.2.1.f. Responds to a 40 BPM step decrease in 1.4 to 3.9 seconds per AAMI EC-13-1992, section 3.1.2.1.f. Response times include a 2.5-second display update interval.Heart Rate Response to Irregular Rhythm: (AAMI EC13-1992, section 4.1.2.1.e.) Ventricular Bigeminy: 80 BPM (expected)Slow Alternating Ventricular Bigeminy: 60 BPM (expected)Rapid Alternating Ventricular Bigeminy: 120 BPM (expected)Bidirectional Systole: 45 BPM (expected)Tachycardia Response Time: Response time to tachycardia alarm is on average 3.43 seconds (with a range of 1.15 to 10.69 seconds) per AAMI EC-13-1992, section 3.1.2.1.g. Response times include a 2.5second display update interval.Alarms
Heart Rate, BP, SpO2, Resp & Temp Alarm:Audible: 5 pulse, 800 tone, with a PW of 150 msec, a PRI of 225 msec, and a repetition interval of 10 seconds.Visual: Heart Rate Alarm causes the displayed heart rate to flash at 2 Hz. This display is located at the top of the display and is 0.4" high and 0.28 to 0.840" wide depending on num-ber of digits in the heart rate. Color is amber, black, white, or whatever the color the display text is.Lead Fault Alarm: Audible: 3 pulse, 500 Hz, triplet tone with a PW of 200 msec, a PRI of 310 msec. When the HR alarm is set or the pacer is on, the lead fault tone repeats at a repetition interval of 20 seconds.Visual: Lead Fault condition causes a "LEAD FAULT" message to be displayed on the trace along with a dashed line the width of the trace. The text is 0.18" high and is the color of the display text. The dashed line is 5" long, the width of the display. The signal is not modulated.Physiological Alarms (SpO2):Audible: See Heart Rate AlarmVisual: Physiological alarms cause the displayed parameter to flash at 2 Hz. Color is amber, white or the same as the display colored text.Mute Duration: 90 seconds.Recorder
Type: High-resolution thermal array. Annotation: Time, date, ECG lead, ECG gain, heart rate, defibrillation and treatment summary ACLS events.Paper Width: 50 mm.Paper Speed: 25 mm/sec, 50 mm/sec, 50 mm/secDelay: 6 seconds.Frequency Response: Automatically set to monitor's frequency response.Treatment Summary: 7 switches to record key ACLS events (IV, INTUB, EPI, LIDO, ATROP, etc.). Automatically logs into memory the type of event, time and ECG sample.Tx Summary Log: 28 ECG events or 300 non-ECG events.Record Modes: Manual and automatic (User-configurable).Battery
Standard Type: NiCad 12 volt - M&B SmartPak PlusTM. Standard Capacity: Up to 2 hours ECG monitoring or 60 full-energy discharges or 1.5 hours combined ECG, SpO2 and BP monitoring while pacing. Actual operating times will depend on the number of features activated and the duration of their use. Proper battery care is required to maintain maximum available capacity.Self-Test: Bi-color LED indicates battery charge state. Green = usable charge, Red = requires charging.Low Battery Indicator: Flashing low battery icon on display and flashing LED on battery.Recharge Rate: 80% in 3.5 hours. 100% in 4.5 hours.High Capacity Type: NiMH 12 volt - M&B SuperPacTM. High Capacity: Up to 4 hours ECG monitoring or 110 full-energy dis-charges or 3 hours combined ECG, SpO2 and BP monitor-ing while pacing. Actual operating times will depend on the number of features activated and the duration of their use. Proper battery care is required to maintain maximum avail-able capacity.Recharge Rate: 80% in 7.5 hours. 100% in 9.5 hours.Multiple Paired Contacts: Insures quick, error-free insertion and backup reliability.General
Weight: 10 pounds (4.95 kg) (basic configuration).Size: 13 x 12.5 x 5.3 inches (33 x 31.8 x 13.5 cm).Operating: Temperature*: 0 to 45° CHumidity* (NC): 15 to 95% RH (30 to 90% with CO2 probe)Vibration*: MIL-STD 810EShock / Drop*: MIL-STD 810EAltitude: Up to 4572 M (15,000 feet)Transport and Storage: Temperature: -30 to 70°C (-20 to 70°C with CO2 probe) Humidity: 15 to 95% RH (non-condensing)Atmospheric pressure: 860 to 1060 hPaShock/vibration: ISTA 1AEnclosure Protection*:Solid Foreign Object: IEC 529, IP2XWater: IEC 529, IPX4.All tests performed per AAMI DF-2 Defibrillation Standard.Medical EquipmentHospital Furniture and Surgical EquipmentX-Ray Machine and Ultrasound ScannerObstetric Gyneacology Centre and Rehabilitation Therapeutic ApparatusDental Clinic Equipment and OphthalmoscopLaboratory EquipmentSterilizer & Disinfection ProductsMortuary EquipmentHomecare ProductVeterinary Equipment and Education Equipment
Address:
Room 510, No. 301, Huanshi Middle Road, Yuexiu, Guangzhou, , China
Business Type:
Trading Company
Business Range:
Health & Medicine, Security & Protection
Management System Certification:
ISO 9001, ISO 9000, GMP, ISO 13485
Company Introduction:
Our Products
Since establishment, MeCan has supplied the highest quality, most reliable medical hospital equipment and medical equipment for clinics to countries all over the world. Our medical devices are provided in a wide range varying in complexity and application, including digital radiography system, mammography, endoscope, B-ultrasound, doppler ultrasound, ECG and holter recorder, monitor, microscope, operation lamp, hospital beds, X-ray equipment, lab analyzer, dental chair, etc.
Our Mission
Our seasoned group of people are united by a common mission: To make MeCan the most trusted medical hospital equipment supplier worldwide and the first choice of clinic practitioners and their patients. MeCan′s high quality and performance is guaranteed by an uncompromising approach to quality.
Our Clients
Hospitals, laboratories, clinics, physicians′ office practices, portable X-ray units′ distributors, healthcare workers and mobile veterinarians are a few of our many customers.
Our Service
MeCan medical equipment is your first choice of equipment for hospitals and clinics! After-sale service is guaranteed by long-term warranties, superior distribution network, and excellent technical support.
Other Products
Other products in the MeCan range of medical equipment include:
Hospital Medical Equipment & Supplies
Lab Equipment & Supplies
Respiratory & Sinus Infection Treatment Supplies
Dental Supplies, Products & Equipment
Surgical Instruments, Supplies & Equipment
Veterinary Equipment & Supplies
Skin & Wound Care Products & Supplies
Diabetic Supplies & Products
Diagnostic Supplies, Products & Equipment
Emergency Medical Supplies & Equipment
Home Health Care Products & Medical Supplies
Medical Uniforms, Medical Scrubs & Apparel
Mobility Products
Orthopedic Products
Rehabilitation Equipment & Products
Sports Medicine Products & Supplies
Living Aids
And much more