2. Appliance introduction:
Before using, please fill pour clear water into moisture bottle about one third reaching water linesite.
DF-2 blind nut straw into bolt head, make the pipe of flow meter square water line.
Put off regulator, put on oxygen tube switch, so you will the data from needle position of pressure gauge . At last, straw flow on /off at anti-
clockwise according to patients need adjust switch.
If patient need oxygen for a long time,can nse nose pipe to help patient absorb oxygen.
Moisture bottle circles at clockwise, adjust oxygen hole to other site.
3. Attention point
Before using the suction, you will check all parts bad or good and clean it by drying cloth.
Pressure gauge, regulator no oil, otherwise explode.
Clearwater in moisture bottle keeps clean.
There isadjustable nut in the front ofplunder shall be straw at clockwise.
Relief value keeps out ofdanger.
Oxygen dosage is decided by doctor.
After using suction, put off the oxygen tube switch, make rest oxygen out,pressure gage to zero site, last put off flow switch if using again, first put on the oxygen tube switch, avoid exploding.
The product must be examined periodical, at least once every 6 month.
Audited Supplier 
){kind=link}