| Customization: | Available |
|---|---|
| Certification: | CE |
| Noise Level: | ≤50dB |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
oxygen concentrator is a device that extracts oxygen from atmospheric air. It will typically be an electrically-powered molecular sieve (artificial zeolite) used to separate nitrogen from ambient air. It could be applied widely in the hospitals at all different level, clinics, health centers and family nursing, health care for the old person, mental workers and students, etc.. The oxygen concentrator can supply 1-2 patients simultaneously, with steady oxygen flowing out, safe and reliable, low cost, adjustable flow. The key parts of the concentrator adopt anti-tiring and anti-aging design, and the planned life of the whole concentrator reaches up to 20,000 hours or 5 years, whichever comes first.
Technical Parameters
Total 8 indicating lamps and their indication for the MC-JAY model, which is shown as Figure 1, are as follows:
a. P.O.: power switch (green lamp)
b. P.F.: power failure(red lamp)
c. H.P.: high pressure(red lamp)
d. L.P.: low pressure(yellow lamp)
e. H.T.: over heated temperature(red lamp)
f. H.O2: oxygen purity is >= 85%, (blue lamp)(Accuracy:±3%)
g. M.O2: no use
h. L.O2.: oxygen purity is < 85%,(red lamp)(Accuracy:±3%)
2 Power switch
3 Oxygen flow meter
The location of float in the oxygen flow meter shows the outlet oxygen flow (L/min.).
4 Knob of oxygen flow meter switch
It adjusts and controls the outlet oxygen flow.
Do not Switch it over-forced, or else it is easy to damage the valve core. Switch it
counterclockwise to turn on, clockwise to turn off.
5 Outlet for Atomization (optional)
6 Intake air filter
Once need to replace, refer to 11.2 on page17
7 Storage cabinet
It is used for storage oxygen cannula
8 LCD display( Liquid crystal display )
a.. It can display some status of during operation of the oxygen concentrator
b. When starting the oxygen concentrator, the LCD screen is lighted, and it will return to screen saver mode in 15 minutes. But if you press the right key during working, the screenwill be lighted again.
9 Timing buttons
The two buttons are used for timing adjustment, and each press of the left button(△) will increase timing by 10min, the max timing is 40 hours. And each press of the right button(▽) will decrease timing by 10min. When the right button(▽) is pressed to reduce timing till "0", the oxygen concentrator will turn off automatically.
10 Humidifier
Humidifier which is used for humidifying oxygen and preventing throat and nasal mucosa stimulated by dry oxygen and dry hard sputum difficult to spit out.
11 Knob of Atomizer switch (optional)
12 Rating label
13 Appliance inlet
14 Holder
){kind=link}